Lamp With Quartz Diodes Sun 1

What are quartz LEDs? These are a new generation of diodes that have higher efficiency than conventional ones. Due to more diffused light, materials set much better, which means that craftsmen will spend less time drying various materials. Quartz LEDs look much more expensive and modern in appearance. Quartz is not subject to “burnout” and is resistant to ultraviolet radiation (the problem with LEDs in previous generation lamps is caused by the fact that the silicone in the diodes is not resistant to ultraviolet radiation, which led to a gradual “burnout” of the LED, reducing drying efficiency over time.) The heating temperature of the LED is reduced, which reduces the risk of failure. Also, the new LEDs have a more pleasant and delicate glow than the old ones. The lamp body is made of durable plastic, the bottom is removable, metal. On the top and bottom of the case there are holes for hot air ventilation, mode control buttons and light indicators that light up above the selected time mode. Functions of the SUN1 lamp buttons: “ON/OFF” - Turns the device on/off (the lamp is turned on automatically by the sensor), works for 90 seconds. Holding for more than 2 seconds turns on the mode of gradual increase in power from the minimum. “5s” - Timer for 5 seconds. “30s” - Timer for 30 seconds. “60s” - Timer for 60 seconds. The infrared sensor automatically turns on the lamp in the last set mode. In order to change the automatic start time, you must hold the button of the selected time mode for 5 seconds. Technical characteristics: Lamp type: LED Number of quartz diodes: 30 pcs Timer: 5, 30, 60 and maximum mode 90 seconds Wavelength safe for human health: 365 - 405 nm Weight: 805 g Housing material: metal, plastic Dimensions (l/w/h): 150/190/80 mm Cord length: 145.5 cm Equipment: LED lamp, adapter, instructions.