Dry-Heat Cabinet Ferroplast Premium "10"

Stylish and modern sterilizer with a touch control panel, door locking in operating mode and a glass insert. The Ferroplast sterilizer is designed for air thermal sterilization of medical and manicure instruments, glassware and other cosmetic accessories, heat-resistant up to 200°C. The sterilizer provides operating modes for disinfection and drying of cosmetic instruments and heat-resistant accessories. The main distinguishing features of Ferroplast sterilizers from analogues: increased productivity; compact model; lightweight design; reduced time to reach operating mode and cooling time; increased surface area for sterilized instruments by 50%; the sterilization chamber was developed using computer modeling in order to achieve maximum air injection, which allows the instrument to be placed in the sterilization chamber on 5 shelves simultaneously. Characteristics: Electrical power consumption 0.9 kW; Operating voltage 220 V, frequency 50 Hz; Overall dimensions, (WxDxH) 30x39.5x42.5 cm; Weight no more than 13 kg; Time to reach 180°C mode, no more than 30 minutes; Useful internal volume of the sterilization chamber 10 l. Noise, created by the sterilizer, no more than 65 dBA. Contents: 5 shelves (capacity - 10 kraft bags) The Ferroplast sterilizer, when the sterilization chamber is loaded, must provide automatic support for temperature conditions in the range from +85°C to +180°C and sterilization and disinfection holding time, as well as a user programmable mode +50°C to +200°C, with an interval from 1 to 999 minutes. The Ferroplast sterilizer has an automatic emergency shutdown system for the heating element at a temperature in the sterilization chamber of +215°C with an accuracy of ±10°C. The sterilization process automatically stops if the set temperature deviates more than ±3°C. The Ferroplast sterilizer has a sound and light signaling system for operating modes:- light and sound indication of work stages; - digital indication of set and current mode values, allowing you to control the temperature in the sterilization chamber, with a discreteness of no more than 1°C and a time discreteness of no more than 1 minute. Mean time between failures is at least 1000 hours. The time of continuous operation of the sterilizer in operating mode is at least 16 hours with a mandatory break of 8 hours. The average service life is at least 5 years.